starclick

Tuesday, 14 May 2013

CPU Fan assembles & disassembles Notices

CPU Fan assembles & disassembles Notices
When you assemble CPU fan, please kindly follow below picture to lock.
When you would like follow below picture to lock, please push down on the top of each of the fasteners in an alternate pattern, while holding the fan heat sink in place.
You should hear a “Click” when pushing down each fastener. Check that all four fasteners are securely attached by gently pulling up on each fastener. Have an unattached fastener will prevent a good seal between the fan-heat sink and processor and could result in unreliable operation of the processor.
 
 
 
 
1.      Check CPU Fan fasteners’ black pins have lock or Not.

No comments:

Post a Comment

Every Admin Should Know These Commands Active Directory 1.   To quickly list all the groups in your domain, with members, run this c...